280型橡膠磨粉機 280 Fine rubber power pulverizer unit
用途:每組磨粉機有3臺調速電機,本設備需水冷系統,出料成品為20-80目(細度可以調節)。
結構與原理
該機由叁臺粉碎主機,旋風收集機構、整套電器設備等組成。主機由機架、主電機、無級變速電機、送料機構、調節機構及一對動磨盤和定磨盤等組成。其基本原理為通過兩磨盤的相對運動,將物料剪切、碾磨而達到粉碎之目的。采用風、水冷卻有效地控制粉碎溫度,確保被粉物料之質量。送料機構選用無級變速,可根據不同物料,調節相應的進料速度,從而得到最理想的產量和質量。通過旋風收集機構,取走成品粉,全過程無任何粉塵飛揚。
優點體積小、噪音低、產量高、能耗低、操作簡單、拆裝方便,無任何環境污染。所得膠粉細而均勻且粉體表面帶有眾多毛刺形,易與其它膠體結合。
Use:each unit has three buncher,This device is water-cooled system, product for 20-80 mesh fineness (can be adjusted.).
Structure and Principle: This machine is made up of three sets of crusher hosts,Tornado collection agency and set of electrical equipment. The host is mde up of frame ,main motor,Set of electrical equipment,feeding mechanisms,Regulatory agencies,A pair of moving disc and fixed disc set.The basic principle for the relative motion through two micropipette grinding materials, cutting, grinding and achieve the goal. Using the wind, water temperature, effectively controlled by powder grinding materials to ensure the quality. Sheets-feeder chooses stepless speed, can according to different materials, and adjust the corresponding feeding speed, thus obtains the optimal output and quality. Through collecting agencies, take whirlwind, without any product powder dust. Small size, low noise, high output, low energy consumption, simple operation, easy disassembly, without any environmental pollution. Income and fine powder with numerous burr and powder surface fractal, easy and other colloid.
技術參數:
型號 | XFJ-280 |
主電機 | 22kw*3=66kw |
調速電機 | 1.1kw*3=3.3kw |
風機 | 7.5kw |
關風機 | 0.75kw |
進料尺寸 | 3-8mm |
粉碎細度 | 20-80 mess(可調)) |
尺寸 | 1560*1500*1400 |
重量 | 2500kg |